Opens in a new tab

Morpheus8 Burst Rf Microneedling in Vancouver + Burnaby

Go Deeper When the Skin Asks For It.
Fractional radiofrequency microneedling designed to remodel skin and soft tissue at multiple depths for concerns including laxity, texture, scarring and contour.
Book Morpheus8 Burst

Morpheus8 Burst at Everwell

Skin Has Layers. So Does Aging.
The changes we see on the surface don't always begin there.

Collagen changes deeper within the dermis. Tissue becomes less firm. Acne scars extend below what we can see. And in some areas, the relationship between skin and underlying adipose tissue begins to change the contour itself.

Morpheus8 Burst combines microneedling with fractional radiofrequency energy to work across those different depths. The needles create controlled micro-injuries while delivering RF energy directly into selected layers of tissue, creating a thermal response where we want remodeling to occur.

And with Burst technology, that energy can be delivered across multiple depths within a single pulse.

What Morpheus8 Burst Can Treat

Work Below What You Can See.
Morpheus8 Burst can be adjusted according to the depth and type of tissue we're trying to reach, making it useful for concerns that involve both the skin itself and the structures immediately beneath it.

Skin Laxity

Create controlled thermal injury within targeted tissue to support collagen remodeling and improve the appearance of firmness.

Deep Lines + Wrinkles

Work with age related changes in collagen and skin structure contributing to fine lines and creasing.

Acne Scarring

Target deeper structural changes associated with selected acne scars while supporting remodeling through the dermis.

Uneven Texture

Combine controlled microneedling with RF energy to encourage renewal and improve irregular skin texture.

Lower Face + Jawline

Work at selected dermal and subdermal depths when skin laxity and soft tissue are contributing to changes through the lower face.

Body Skin + Tissue

Use deeper treatment capabilities across appropriate body areas when laxity, texture or subdermal adipose tissue are part of the concern.

How Morpheus8 Burst Works

Meet the Tissue Where It Is.
Morpheus8 Burst combines two forms of controlled stimulation. First, a matrix of microneedles enters the tissue at a selected depth. Then bipolar radiofrequency energy travels between the electrodes, creating controlled heat within the targeted tissue.

That thermal response causes immediate contraction within treated soft tissue while initiating a longer process of collagen remodeling and repair. But the defining feature of Morpheus8 Burst is what happens within a single pulse.

Its Burst functionality can automatically deliver RF energy at multiple tissue depths in rapid succession, allowing us to create several treatment zones without repeatedly treating each depth independently.

That means treatment can be designed around the architecture of the tissue itself. More superficial where we’re working with skin. Deeper where we’re working with soft tissue. And different again when we move from face to body.

Meet Our Practitioners

Morpheus8 Burst Technology

One Pulse. Multiple Depths.

Morpheus8 Burst Body Treatments

More Tissue Calls for More Depth.
The skin on the face and the tissue across the body don't ask for exactly the same treatment.

Body areas are larger. The tissue can be thicker. And when laxity exists alongside localized subdermal fat, the treatment target may sit significantly deeper than it does when we’re working primarily within facial skin.

For these areas, Morpheus8 technology can use a larger 40-pin treatment tip designed for deeper soft tissue applications. Its deeper treatment profile allows RF energy to extend through dermal tissue and into the subdermal adipose layer, creating controlled coagulation and contraction at depths that conventional microneedling cannot reach.

Morpheus8 body technology can create a thermal treatment profile extending up to 8 mm, combining needle penetration with an additional zone of thermal effect beneath the needle tip.

Up to 8 mm
Thermal treatment profile on the body, combining needle penetration with an additional zone of thermal effect beneath the needle tip.
  • Body Skin Tightening

    Deliver fractional RF at deeper levels to support contraction and remodeling when laxity extends beyond the superficial skin.
  • Subdermal Adipose Tissue

    Reach into appropriate layers of underlying adipose tissue when localized fat is contributing to the contour of an area.
  • Crepey + Uneven Texture

    Work across dermal depths to improve skin quality where the body has become thinner, looser or more texturally irregular.
  • Body Contouring

    Address the relationship between skin laxity and underlying soft tissue when both are influencing the shape of an area.
Common treatment areas can include the abdomen, thighs, buttocks, upper arms, knees and other appropriately selected areas of the body. But deeper isn't automatically the goal. We choose depth according to the anatomy, the amount of tissue present and what we're actually trying to change.

Morpheus8 Burst Results

What to Expect.

Results

Progressive improvement in firmness, texture, and treated tissue as collagen remodeling develops

Treatment Time

45-90 minutes

Discomfort

Moderate; topical numbing and additional comfort measures may be used

Recovery

Redness, swelling and pinpoint marks expected initially; recovery varies by depth and intensity

How Results Develop

Some changes in tissue contraction may be noticeable earlier, but Morpheus8 Burst is fundamentally a remodeling treatment. Collagen production and tissue reorganization take time, so results continue developing over the weeks and months following treatment.

How Many Treatments?

A series is commonly recommended when we’re trying to create progressive change in skin quality, scarring or laxity. The number and spacing of treatments depend on the area, tissue depth, treatment intensity and how your skin responds.

Connect Skin + Body Care at Everwell

Different Layers Need Different Tools.
Morpheus8 Burst can address several layers within one treatment, but it doesn't need to do every job. When pigment, facial volume, localized fat or recovery are part of the picture, we can build those concerns into the plan separately.
  • Lumecca PEAK IPL

    Target visible pigmentation and vascularity with intense pulsed light when colour is part of the concern alongside texture or laxity.
    Explore Lumecca PEAK IPL
  • Sculptra + Biostimulators

    Support collagen and facial structure through injectable biostimulation when age related changes extend beyond skin remodeling alone.
    Explore Sculptra + Biostimulators
  • OndaPro

    Use targeted microwave technology to work with localized fat, cellulite and tissue firmness when body or facial contour requires a non-invasive approach at another layer.
    Explore OndaPro
  • CoolPeel CO2

    Complement deeper radiofrequency microneedling with targeted laser resurfacing to address surface texture, fine lines, and sun damage for more comprehensive skin renewal.
    Explore CoolPeel CO2

Morpheus8 Burst Pre + Post Care

Before + After Your Treatment.

Before

To prepare your skin for Morpheus8 Burst and support a smooth recovery, please follow these guidelines:
  • 5 days before
    Discontinue active skincare ingredients, including alpha hydroxy acids (AHAs), beta hydroxy acids (BHAs), retinol, vitamin C, and exfoliating scrubs.
  • 7 days before
    Avoid aspirin, ibuprofen (Advil or Motrin), meloxicam (Mobic), naproxen (Aleve), and other blood-thinning medications, where medically appropriate.*
  • Before your appointment
    Avoid prolonged sun exposure. If spending time outdoors, apply a zinc oxide sunscreen with SPF 30 or higher.
  • On the day of treatment
    Arrive with clean skin, free of makeup, lotions, perfume, powders, and oils. You'll have an opportunity to remove makeup at the clinic if needed.
*Do not stop or adjust prescribed medications without consulting your prescribing healthcare provider.

After

To protect your skin as it heals and support your results, follow these guidelines after your appointment:
  • First 24 hours
    Avoid applying makeup. After this time, makeup may be applied if the skin is no longer experiencing active oozing or significant warmth and redness.
  • First 2–3 days
    Use the moisturizer provided or recommended by your provider. You may typically resume your usual gentle skincare routine within this period, depending on how your skin is healing.
  • First 5–7 days
    Avoid retinoids. These may be reintroduced once the skin has sufficiently recovered.
  • Throughout recovery
    Cleanse and bathe as usual, but treat the skin gently. Avoid scrubbing, rubbing, or irritating the treated areas.
  • Sun protection
    Avoid direct sun exposure to minimize the risk of hyperpigmentation. Apply a broad-spectrum SPF 30+ daily, reapplying every few hours when outdoors.
  • Follow-up treatments
    If completing a series, schedule your next appointment approximately 4–6 weeks after treatment, as recommended by your provider.

What to Expect

A normal recovery, day by day.
  • The first few days

    Redness, mild to moderate swelling, and a sunburn-like sensation are common immediately after treatment. These effects typically last 1–3 days, although redness and swelling may persist for 3–5 days or longer following more intensive treatments.
  • As the skin renews

    Your skin may feel warm or tighter than usual, with temporary crusting or peeling developing over 3–7 days. Areas of pigmentation may also appear darker during the healing process.
  • Results over time

    Improvements develop gradually as the skin renews and collagen remodeling progresses. Initial changes may become more noticeable after approximately 28 days, with results continuing to improve for up to 6 months. Multiple treatments may be recommended depending on your skin and goals.

Morpheus8 Burst FAQs

A Little More Clarity.

Morpheus8 Burst is a fractional radiofrequency microneedling technology by InMode.

It combines microneedles with bipolar RF energy to create controlled thermal treatment at selected tissue depths, supporting soft tissue contraction and remodeling. Its Burst functionality allows RF energy to be automatically delivered across multiple depths within a single pulse.

Morpheus8 Burst can be used for concerns including skin laxity, fine lines, uneven texture, selected acne scarring and soft tissue changes affecting facial or body contour. The appropriate treatment depends on the area, tissue depth and concern.

Morpheus8 Burst is designed for soft tissue contraction and remodeling. Controlled RF heating can produce contraction within treated tissue while initiating longer term collagen remodeling, which can progressively improve the appearance of firmness.

Fractional RF microneedling can be used to improve selected acne scars by creating controlled injury and thermal remodeling within scarred tissue. Scar type and depth matter, so some patients may benefit from a combination approach rather than Morpheus8 alone.

Morpheus8 Burst builds on fractional RF microneedling by allowing energy to be delivered automatically across multiple programmed tissue depths within one pulse. This gives us additional flexibility when a treatment needs to work through several layers rather than repeatedly treating one depth at a time.

No. Both use needles to create controlled micro-injuries, but Morpheus8 also delivers radiofrequency energy directly into the tissue. That allows us to create a controlled thermal response at specific depths in addition to the mechanical stimulation created by the needles.

Both stimulate remodeling, but from different directions.

CoolPeel uses fractional CO2 laser energy to create controlled ablation and thermal stimulation beginning at the skin’s surface, making it particularly useful for concerns such as texture, fine lines, pores and photoaging. Morpheus8 uses needles to carry radiofrequency energy beneath the surface, allowing treatment to reach deeper dermal and subdermal tissue.

One works from the surface inward. The other lets us place energy deeper within the tissue.

Both can work with tissue beneath the skin, but they get there differently. Morpheus8 Burst uses microneedles to deliver fractional radiofrequency energy directly at selected dermal and subdermal depths. OndaPro is non-invasive and uses microwave energy delivered through the skin to target selected tissue depths.

When laxity, texture and deeper tissue all need attention, Morpheus8 may make sense. When localized fat, cellulite or contour is the primary concern and a non-invasive approach is preferred, OndaPro may be more appropriate. Sometimes the two can occupy different roles within the same longer term plan.

At deeper treatment levels, Morpheus8 technology can work within subdermal adipose tissue as well as dermal tissue. InMode specifically positions Morpheus8 Burst for both dermal contraction and subdermal adipose applications.

That doesn’t make it a weight loss treatment. When localized fat is part of the concern, depth and energy need to be selected intentionally according to the area and the tissue we want to preserve.

No. Not when treatment is planned and performed appropriately by an experienced practitioner with advanced training.

Morpheus8 is capable of reaching into subdermal tissue, but that does not mean every facial treatment should be performed at those depths. On the face, treatment depth, energy level and number of passes are selected according to the anatomy of the area and the tissue we actually want to affect.

In areas where facial fat is important for structure and youthful support, the goal is to stay within appropriate dermal depths and avoid unnecessary treatment of the underlying adipose tissue.

This is one of the reasons practitioner experience matters so much with Morpheus8. The device gives us a wide range of treatment depths and intensities. The skill is knowing when to use them, and when not to.

Morpheus8 body technology can create a thermal treatment profile extending up to approximately 8mm, described by InMode as 7mm of subdermal adipose treatment depth with an additional approximately 1 mm thermal profile beneath it.

This doesn’t mean the needles themselves penetrate 8mm. The additional depth comes from the thermal effect created beyond the physical needle tip.

Morpheus8 involves both needle penetration and RF heating, so treatment can feel more intensive than traditional microneedling. Topical numbing and other comfort measures may be used depending on the area and planned treatment depth.

Some early changes may become noticeable as initial swelling resolves and treated tissue contracts. The more meaningful changes develop gradually as collagen remodeling occurs over the following weeks and months.

Treatment plans vary according to the concern, area, depth and degree of change we’re trying to create. A series is often used for progressive remodeling, but we’ll assess how your tissue responds rather than treating a predetermined number as the goal.

Book Morpheus8 Burst in Vancouver + Burnaby

Treat the Layer That Changed.
Skin doesn't age at one depth. Neither should every treatment.

Morpheus8 Burst gives us the ability to move through those layers with intention, from skin quality and collagen to deeper soft tissue when the anatomy calls for it.

We start with what you see. Then we look underneath.