Opens in a new tab

Clear + Brilliant Laser in Vancouver + Burnaby

Keep Good Skin Going.
A gentle fractional laser treatment designed to support smoother texture, clearer tone and ongoing skin renewal with minimal downtime.
Book Clear + Brilliant

Clear + Brilliant Fractional Laser at Everwell

You Don’t Have to Wait for Your Skin to Change Dramatically.
Some treatments are corrective. Clear + Brilliant belongs just as comfortably in the space before that.

It uses gentle, non-ablative fractional laser energy to create thousands of microscopic treatment zones within the skin, encouraging renewal while leaving the surrounding tissue intact.

At Everwell, we have both the Original 1440 nm handpiece and the Perméa 1927 nm handpiece, allowing us to choose a different depth and treatment emphasis depending on what your skin needs.

Maybe texture has started to feel a little less smooth. Maybe tone looks less even. Maybe you simply want to maintain the skin you’ve already worked hard to care for. Clear + Brilliant gives us a way to keep that process moving.

What Clear + Brilliant Can Treat

Small Changes Add Up.
Clear + Brilliant is particularly well suited to early or more subtle changes in skin quality, and to patients who want consistent maintenance without the recovery of more intensive resurfacing.

Uneven Texture

Support smoother looking skin by creating controlled fractional treatment zones that encourage fresh epidermal and dermal renewal.

Early Fine Lines

Work with subtle changes in skin texture and collagen before they become more established.

Uneven Tone

Improve the appearance of mild discolouration and dullness for a complexion that looks clearer and more even.

Visible Pores

Refine the appearance of pores as overall texture and skin quality improve.

Radiance

Support fresher, brighter looking skin when the complexion has started to look dull or tired.

Preventative Maintenance

Use gentle fractional resurfacing as part of an ongoing skin plan designed to maintain quality rather than waiting until more significant correction is needed.

How Clear + Brilliant Works

Create Change Without Taking Everything Down.
Clear + Brilliant uses the principle of fractional photothermolysis. Instead of treating the entire surface of the skin at once, the laser creates microscopic columns of controlled thermal injury surrounded by untreated tissue.

Those intact areas help support recovery while the treated zones begin a renewal process. Damaged or older cells are gradually replaced. The skin’s repair response is activated. And over time, texture, tone and overall skin quality can begin to look more refined.

Because the treatment is non-ablative, the surface of the skin remains largely intact rather than being vaporized as it is with an ablative CO2 laser. Enough disruption to create a response, without asking your skin to start over.

Meet Our Practitioners

Clear + Brilliant Technology

Two Wavelengths. Two Different Depths.

Original 1440 nm

The Original handpiece uses a 1440 nm infrared diode laser and reaches more deeply into the epidermis and dermis, with the manufacturer describing treatment penetration up to approximately 0.4mm.

This makes it useful when we’re working more intentionally with concerns such as:

  • uneven texture
  • early fine lines
  • visible pores
  • overall skin quality

Perméa 1927 nm

The Perméa handpiece uses a 1927 nm wavelength and works more superficially, with treatment penetration up to approximately 0.17mm.

That more superficial interaction makes Perméa particularly useful when the conversation is centred around:

  • visible radiance
  • mild uneven tone
  • superficial pigmentation
  • overall brightness
  • enhancing the skin’s receptivity to appropriately selected topical skincare immediately following treatment

Clear + Brilliant Results

What to Expect.

Results

Progressive improvement in texture, tone, and overall skin quality over days and weeks following

Treatment Time

30-45 minutes

Discomfort

Mild

Recovery

Minimal to no social downtime; temporary redness, warmth, slight dry or rough texture in days following

Your skin may look slightly red or feel warm shortly after treatment, followed by a period where it can feel dry, finely textured or almost sandpaper-like as the microscopic treatment zones renew.

Visible improvements tend to develop gradually rather than appearing all at once. Skin can begin to look smoother, clearer and more refreshed as that renewal process progresses. Clear + Brilliant is often used as a series or maintenance treatment, particularly when the goal is ongoing skin quality rather than correcting one significant concern.

Connected Skin Care at Everwell

Good Skin Rarely Comes From One Thing.
Clear + Brilliant can support ongoing texture, tone and renewal, while other treatments can address hydration, surface congestion or more established pigment alongside it.
Deliver a personalized blend of skin supportive ingredients, including micro-tox, through fine microchannels when hydration, refinement and an overall skin refresh are part of the plan.
Explore AquaGold
Support cheek skin hydration and smoothness from within using injectable hyaluronic acid when your skin needs more than surface renewal alone.
Explore SkinVive
Combine cleansing, exfoliation and hydration to support the skin surface and keep congestion, buildup and dehydration from working against your longer term treatment plan.
Explore Hydrafacial
Target more distinct brown pigmentation and vascular redness when colour has become a larger concern than fractional resurfacing alone is designed to address.
Explore Lumecca PEAK IPL

Clear + Brilliant Pre + Post

Before + After Your Treatment.

Before

To prepare your skin for Clear + Brilliant laser treatment and support a smooth recovery, please follow these guidelines:
  • At least 2 weeks before
    Avoid direct sun exposure, tanning beds, and self-tanners. Treatment cannot be performed on sunburned or deeply tanned skin.
  • 2 weeks before
    Avoid cosmetic injectables, including Botox and dermal fillers, as well as chemical peels in the treatment area.
  • 5–7 days before
    Discontinue retinoids (Retin-A, tretinoin, retinol), glycolic acid, salicylic acid, and other chemical or physical exfoliants.
  • On the day of treatment
    Arrive with clean skin, free of makeup, moisturizers, sunscreen, and perfume.
If you're prone to cold sores: Let your provider know before your appointment to discuss preventative antiviral medication.

After

To protect your skin as it heals and support the renewal process, follow these guidelines after your appointment:
  • First 12–24 hours
    You may apply a clean, cool compress or an ice pack wrapped in a clean towel for 10 minutes at a time to help relieve warmth or swelling.
  • First 24 hours
    Avoid applying makeup.
  • First 48 hours
    Avoid strenuous exercise, hot tubs, saunas, steam rooms, and hot showers to prevent additional irritation.
  • First 5–7 days
    Keep your skincare routine gentle. Cleanse with a mild, soap-free cleanser and lukewarm water, and apply a soothing, non-comedogenic moisturizer to support the skin barrier.
  • Until the skin has healed
    Avoid scrubbing, rubbing, exfoliating, or using facial brushes. Do not reintroduce active ingredients, including retinol, vitamin C, and AHA/BHA acids, until your skin has returned to its normal, smooth texture.
  • For at least 2–4 weeks
    Avoid prolonged sun exposure. Apply a broad-spectrum mineral SPF 30+ daily to protect your skin and minimize the risk of hyperpigmentation.

What to Expect

A normal recovery, day by day.
  • Warmth

    Mild warmth, swelling, and a sunburn-like sensation are common during the first 12–24 hours after treatment.
  • Sandpaper texture

    Your skin may begin to feel dry, rough, or slightly sandpaper-like the following day. This is a normal part of the renewal process, as treated skin gradually sheds over 4–7 days.
  • Shedding + renewal

    Allow this texture to resolve naturally without picking or exfoliating. Skin recovery and visible improvements will develop gradually as the renewal process continues.

Clear + Brilliant FAQs

A Little More Clarity.

Clear + Brilliant is a non-ablative fractional laser designed for general skin resurfacing. It creates microscopic zones of controlled thermal treatment while leaving surrounding tissue intact, allowing the skin to renew with relatively minimal downtime.

Clear + Brilliant can be used to support concerns including uneven texture, early fine lines, visible pores, mild uneven tone, dullness and overall skin quality. It is also commonly used as an ongoing maintenance treatment.

The Original handpiece uses a 1440 nm wavelength and reaches more deeply into the epidermis and dermis. The Perméa handpiece uses a 1927 nm wavelength and works more superficially.

In practice, that means Original is often better suited to texture, pores and early structural skin changes, while Perméa can be particularly useful when brightness, superficial tone and radiance are the focus. Your practitioner will choose the handpiece according to what your skin actually needs.

No. Clear + Brilliant is a non-ablative fractional laser. It creates controlled thermal zones within the skin without vaporizing columns of tissue at the surface the way an ablative CO2 treatment, like CoolPeel, does.

Yes. Clear + Brilliant is particularly well suited to patients who want to support skin quality before more significant changes develop.

We prefer to think of that as maintenance rather than prevention. We can’t stop skin from aging. But we can be thoughtful about how we support it while it does. At Everwell, we make the distinction between Clear + Brilliant as more of a facial treatment than corrective laser treatment.

Both are fractional laser treatments, but they differ significantly in intensity and how they interact with the skin.

Clear + Brilliant is non-ablative and is generally used for gentler resurfacing, maintenance, early texture changes and tone with relatively minimal downtime. CoolPeel uses ablative 10,600 nm CO2 energy, creating microscopic areas of tissue vaporization and a stronger resurfacing and collagen remodeling response, meaning the downtime can be more significant.

Clear + Brilliant often makes sense when the goal is to maintain or refine. CoolPeel may make more sense when there is more established texture, fine lines or photoaging to address.

It can improve some mild or superficial uneven pigmentation, particularly when using the Perméa handpiece. However, not all pigmentation should be treated the same way.

More defined sun spots may be better suited to IPL, while conditions such as melasma require particularly careful assessment before proceeding with any laser treatment.

They target different things. Clear + Brilliant is a fractional laser designed primarily around skin renewal, texture and overall tone. Lumecca PEAK uses intense pulsed light to selectively target visible brown pigmentation and vascular redness.

If the concern is a distinct brown spot or visible vessel, IPL may be the more direct tool. If the conversation is broader skin quality and fractional renewal, Clear + Brilliant may make more sense.

Clear + Brilliant can be treated as part of your ongoing skin maintenance, rather than something you only reach for when there is a concern to correct. For patients focused on maintaining skin quality and staying ahead of gradual changes in tone and texture, treatments can be incorporated approximately 3–4 times per year.

If your skin needs a little more of a corrective boost, we may begin with an initial series of 3–4 treatments spaced approximately 2–4 weeks apart, then transition into a maintenance schedule. Think of it less as finishing a treatment series and more as something we can return to as your skin continues to change.

Your skin begins renewing immediately, but visible improvement develops gradually. As temporary dryness and roughness resolve, the skin may begin to look smoother, brighter and more refined over the following days and weeks after your treatment.

If you have an upcoming event that you want to prepare your skin for, we love combining Clear + Brilliant Perméa and AquaGold 2-3 weeks ahead of your event.

Downtime is generally minimal, with Clear + Brilliant being considered a zero ‘social downtime’ treatment, meaning that you can go about most usual activities and routines almost immediately.

You may experience redness, warmth, mild swelling and a dry or sandpaper-like texture for several days while the microscopic treatment zones heal, but this can be covered easily with makeup.

Patients often describe cumulative warmth, prickling or a mild snapping sensation as the handpiece passes over the skin. Topical numbing may be used depending on the treatment approach and your comfort, but some patients choose to do this treatment without numbing.

Book Clear + Brilliant in Vancouver + Burnaby

Take Care of It While It’s Still Good.
You don't have to wait until your skin feels unfamiliar to start thinking about what comes next.

Sometimes the long game is simpler than that. A little renewal. A little consistency. And a plan that keeps evolving as your skin does.